SMART Board SBM600, 800 series and 8070/8055 camera calibration

SMART Board SBM600, 800 series and 8070/8055 camera calibration
(Your cursor is not showing up where you touch the board or monitor)

1. Press the Smart Software Icon in the Windows notification area or Mac Dock, and then press Smart Settings
2. Select Smart Hardware Settings
3. Select Advanced Settings in the drop down menu list
4. Press Calibrate button
5. Press and hold each target until it turns green
6. After Calibration, the Smart Board will automatically take you to the Orientation Screen.
7. Follow the orientation steps and test the touch accuracy again.
8. If touch is still not accurate contact us at support@tierney.com