How to orient the SMART 8070i with Cisco Sync (C40) connected

How to orient the SMART 8070i with Cisco Sync (C40) connected

*NOTE: The 8070i MUST be oriented with 12 Points. And the Cisco Sync (C40) MUST be in a listening mode.

1. Ensure the Cisco C40 is not in a call 

2. Ensure that the PC is showing in Full Screen Presentation Mode

3. Do a 12 Point Orientation of the 8070i

4. Press the * key on the Tandberg/Cisco remote 5 times in rapid succession
(an on screen calibration mode pop up will appear)

5. Complete the calibration mode

6. Press the Home Button on the Tandberg/Cisco remote until the dialing menu's disappear

7. Do a 12 point orientation of the 8070i