Below are Step-by-step instructions that will usually resolve the issue of a flickering portion of a projected image when there is an Intelix/Liberty DIGI-P52 with an Epson projector.
1) Press the Menu button on the front of the DIGI-P52. The menu appears on the projected image.
2) Select Options, then navigate to H Sync. It will be specified if it is currently set to positive or negative.
If the H Sync setting is not available, the firmware needs to be updated - if this is the case contact Tierney Brothers Technical Support at support@tierneybrothers.com and have a Support Ticket started.
3) Press the left arrow button until the polarity setting is opposite of what it was originally.
4) Press the Menu button to close the menu.
Comments
0 comments
Please sign in to leave a comment.