Missing Tool Bar on Epson Brightlink

If you cannot see the main tool bar for your Epson Brightlink Projector, please check  the below menu settings.

1) Press the Menu button on the remote control, select the Extended menu and press the Enter button.

2) Select the Display setting and press the Enter button.

3) Select the Pen Mode Icon setting and press the Enter. Set the setting to On.

4) Select the  icon, then select the  icon to switch to PC Interactive mode.

Note: You cannot switch between the PC Free Annotation mode or PC Interactive mode setting on the whiteboard when the Pen Mode Icon setting is set to Off. In this case, you can switch the settings with the Pen Mode button on the remote control.